Citation: | ZHAO Yongzhe, SHI Zhijun, ZHANG Yingjie. Prediction of deflection capacity of PDM with single bent screw without stabilizer for CBM horizontal-butted well[J]. COAL GEOLOGY & EXPLORATION, 2018, 46(3): 163-167. DOI: 10.3969/j.issn.1001-1986.2018.03.027 |
[1] |
KARISSON H,BRASSFIELD T,KRUEGER V,et al. Performance drilling optimization[J]. SPE/IADC Paper No.13474,1985.
|
[2] |
HASSEN B R,MACDONALD A J. Field comparison of medium and long-radius horizontal wells drilled in the same reservoir[J]. IADC/SPE Paper No.19986,1990.
|
[3] |
王宝新,许岱文,程存志. 弯壳动力钻具造斜率的几何分析与计算[J]. 石油钻采工艺,1994,16(1):32-37.
WANG Baoxin,XU Daiwen,CHENG Cunzhi. Geometric analysis and calculation on the build angle rate of the power drilling tools with curved shell[J]. Oil Drilling & Production Technology,1994,16(1):32-37.
|
[4] |
帅健,于永南,洪学福. 短弯外壳导向钻具造斜率计算[J]. 石油钻采工艺,1996,18(1):4-9.
SHUAI Jian,YU Yongnan,HONG Xuefu. Calculation on the build angle rate of the guide drilling tools with short curved shell[J]. Oil Drilling & Production Technology,1996,18(1):4-9.
|
[5] |
刘修善,何树山,邹野. 导向钻具几何造斜率的研究[J]. 石油学报,2004,25(6):83-87.
LIU Xiushan,HE Shushan,ZOU Ye. Study on the geometric build angle rate of steerable motor[J]. Acta Petrolei Sinica,2004,25(6):83-87.
|
[6] |
周兴全. 中曲率水平井钻井技术[M]. 北京:科学出版社,2002,38(8):163-180.
|
[7] |
吴振江,柳贡慧,李军. 螺杆钻具造斜能力分析及预测[J]. 石油矿场机械,2009,38(8):61-65.
WU Zhenjiang,LIU Gonghui,LI Jun. Analysis and prediction of build-up rate using screw drill[J]. Oil Field Equipment,2009,38(8):61-65.
|
[8] |
王建斌,熊青山,鲁洪清,等. 双弯螺杆钻具几何造斜率计算式的修正[J]. 石油机械,2016,44(12):25-28.
WANG Jianbin,XIONG Qingshan,LU Hongqing,et al. Correction of geometrical build-up rate formula of double tilt PDM[J]. China Petroleum Machinery,2016,44(12):25-28.
|
[9] |
苏义脑. 螺杆钻具研究及应用[M]. 北京:石油工业出版社,2001.
|
[10] |
王辉. 基于地质导向钻井的井眼轨道控制方法与应用研究[D]. 大庆:大庆石油学院,2009.
|
[11] |
刘修善. 井眼轨迹几何学[M]. 北京:石油工业出版社,2006.
|
[12] |
赵永哲. 煤矿区煤层气水平对接井轨迹控制与完井技术研究[D]. 北京:煤炭科学研究总院,2017.
|
1. |
张晓明,耿应春,赵洪山,唐志军. “单弯双稳”导向钻具组合受力分析及在胜利油田的应用. 石油地质与工程. 2021(04): 110-113+118 .
![]() | |
2. |
胡焮彭,赵永哲,徐堪社,王林杰,李鹏,段会军. 黔北矿区煤层顶板水平井钻井关键技术. 煤田地质与勘探. 2020(01): 227-232 .
![]() | |
3. |
孟祥辉. 煤矿钻探用钻杆疲劳寿命预测研究. 煤炭科学技术. 2020(06): 148-153 .
![]() | |
4. |
张迎接,赵永哲,杨忠,莫海涛. 煤矿井下倾斜地层近水平定向钻孔造斜段轨迹设计. 煤田地质与勘探. 2019(02): 27-30 .
![]() | |
5. |
王四一,李泉新,刘建林,赵江鹏,杨冬冬. 冲击螺杆马达研制. 煤田地质与勘探. 2019(05): 225-231 .
![]() |