ZHANG Haitao, XU Guangquan. The development and application of aquifer hydrogeolgical parameter calculation software based on Visual Basic 6.0[J]. COAL GEOLOGY & EXPLORATION, 2018, 46(2): 105-110. DOI: 10.3969/j.issn.1001-1986.2018.02.016
Citation: ZHANG Haitao, XU Guangquan. The development and application of aquifer hydrogeolgical parameter calculation software based on Visual Basic 6.0[J]. COAL GEOLOGY & EXPLORATION, 2018, 46(2): 105-110. DOI: 10.3969/j.issn.1001-1986.2018.02.016

The development and application of aquifer hydrogeolgical parameter calculation software based on Visual Basic 6.0

Funds: 

National Natural Science Foundation of China(41572147)

More Information
  • Received Date: June 16, 2017
  • Published Date: April 24, 2018
  • Hydrogeolgical parameters are important indices of aquifer characteristics and water abundance evaluation. However, the artificial calculation process is extremely cumbersome, and the cyclic iteration of formula always makes mistakes then will cause immeasurable damages. In view of this, the Visual Basic 6.0 which has powerful compiler and visualization function was applied to convert the complex hydrogeolgical parameters calculation and iteration process into program code. Based on pumping test, finally, a set of specialized software was successfully developed to calculate hydrogeolgical parameters and evaluate water abundance. This software has been well applied in the supplementary geological prospecting of A1 coal seam in the second mining district of Xieqiao coal mine.
  • [1]
    国家技术监督局. 矿区水文地质工程地质勘探规范:GB12719-1991[S]. 北京:中国标准出版社,1991.
    [2]
    韩鹏伟,吴胤龙. Excel软件在稳定流计算中的高效应用[J]. 四川地质学报,2016,36(2):289-292.

    HAN Pengwei,WU Yinglong. The application of Excel to the single well steady flow pumping test[J]. Acta Geolgica Sichuan, 2016,36(2):289-292.
    [3]
    郑燕,马亚杰,刘金国,等. 煤矿充水含水层Q-S曲线类型判别与对比[J]. 矿业安全与环保,2016,43(5):78-82.

    ZHENG Yan,MA Yajie,LIU Jinguo,et al. Discrimination and comparison of Q-S curve types of coal mine water-filling and water-bearing strata[J]. Mining Safety & Environmental Protection,2016,43(5):78-82.
    [4]
    张林. Excel在稳定流抽水试验中的应用[J]. 四川地质学报, 2010,30(1):104-107.

    ZHANG Lin. The application of Excel to steady pumping test[J]. Acta Geolgica Sichuan,2010,30(1):104-107.
    [5]
    国家安全生产监督管理总局,国家煤矿安全监察局. 煤矿防治水规定[M]. 北京:煤炭工业出版社, 2011.
    [6]
    李更明,黄保和. 程序设计基础Visual Basic 6.0[M]. 厦门:厦门大学出版社,2014.
    [7]
    李俊. Visual Basic 6.0程序设计与应用教程[M]. 北京:电子工业出版社,2013.
    [8]
    薛禹群,朱学愚,吴吉春,等. 地下水动力学[M]. 北京:地质出版社,2005.
    [9]
    国家煤矿安全监察局. 煤矿防治水规定释义[M]. 徐州:中国矿业大学出版社,2009.
    [10]
    胡建华,陈兴同. 数值计算方法[M]. 徐州:中国矿业大学出版社,2008.
    [11]
    宋晓梅. "迭代法"求水文地质参数的原理及应用[J]. 安徽地质,1999,9(2):123-126.

    SONG Xiaomei. The principle and application of iterative procedure for evaluating the hydrogeolgic parameters[J]. Geolgy of Anhui,1999,9(2):123-126.
    [12]
    庞炳乾. 抽水试验的典型观测曲线分析[J]. 水文地质工程地质,1981,8(2):44-47.

    PANG Bingqian. Analysis of typical observation curve of pumping test[J]. Hydrogeolgy and Engineering Geolgy,1981,8(2):44-47.
    [13]
    奚砚涛,冯春莉,郭英海,等. 钻孔单位涌水量换算的理论与实践[J]. 煤田地质与勘探,2015,43(1):48-51.

    XI Yantao,FENG Chunli,GUO Yinghai,et al. The theory and practice of conversion about specific capacity[J]. Coal Geolgy & Exploration,2015,43(1):48-51.

Catalog

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return