徐志斌, 谢和平, 王继尧. 估算岩石断裂面粗糙度的一种分形模型[J]. 煤田地质与勘探, 1998, 26(1): 10-12,9.
引用本文: 徐志斌, 谢和平, 王继尧. 估算岩石断裂面粗糙度的一种分形模型[J]. 煤田地质与勘探, 1998, 26(1): 10-12,9.
shu
Xu Zhibin, Xie Heping, Wang Jiyao. A FRACTAL MODEL FOR THE ESTIMATION OF ROCK FRACTURE SURFACE ROUGHNESS[J]. COAL GEOLOGY & EXPLORATION, 1998, 26(1): 10-12,9.
Citation: Xu Zhibin, Xie Heping, Wang Jiyao. A FRACTAL MODEL FOR THE ESTIMATION OF ROCK FRACTURE SURFACE ROUGHNESS[J]. COAL GEOLOGY & EXPLORATION, 1998, 26(1): 10-12,9.
shu

估算岩石断裂面粗糙度的一种分形模型

A FRACTAL MODEL FOR THE ESTIMATION OF ROCK FRACTURE SURFACE ROUGHNESS

    摘要
  • 摘要: 提出了一种更为简单的估算岩石断裂面粗糙度(JRC)值的分形模型,可用来模拟岩石断裂面剖面线。断裂面愈粗糙,其分维值也愈大,并建立了分维值与JRC值之间的经验方程。利用此方程估算6条节理剖面线的JRC值,结果与典型的JRC值十分接近。

     

    Abstract: A simpler fractal model to estimate the joint roughness coefficient (JRC) is suggested.It can be applied to simulate rock discontinuity profiles.The rougher the surface,the greater the fractal dimension(D).An empirical equation between JRC and D was established.Using this equation,the JRC values of 6 joint profiles were estimated and they were very close to the typical JRC values.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回