郝世俊, 石智军, 孙荣军, 刘卫东. 抽放瓦斯顺煤层长钻孔施工技术[J]. 煤田地质与勘探, 2003, 31(2): 61-62.
引用本文: 郝世俊, 石智军, 孙荣军, 刘卫东. 抽放瓦斯顺煤层长钻孔施工技术[J]. 煤田地质与勘探, 2003, 31(2): 61-62.
HAO Shi-jun, SHI Zhi-jun, SUN Rong-jun, LIU Wei-dong. Drilling technology of long hole using for discharging gas from coal seams[J]. COAL GEOLOGY & EXPLORATION, 2003, 31(2): 61-62.
Citation: HAO Shi-jun, SHI Zhi-jun, SUN Rong-jun, LIU Wei-dong. Drilling technology of long hole using for discharging gas from coal seams[J]. COAL GEOLOGY & EXPLORATION, 2003, 31(2): 61-62.

抽放瓦斯顺煤层长钻孔施工技术

Drilling technology of long hole using for discharging gas from coal seams

  • 摘要: 介绍了抽放瓦斯顺煤层长钻孔试验情况。在试验中使用定向钻进技术施工了3个钻孔,有1个试验孔深度达509.03m,是目前国内最深的全煤层长钻孔,平均纯钻进时效24.4m/h。这些抽放孔的瓦斯涌出量均达到2.0~2.5m3/min。

     

    Abstract: It is introduced that the test of long drilling hole using for discharging gas from coal seams. Executed 3 hole using directional drilling technology,one drilling hole depth is up to 509.03 m,which is the longest drilling hole in coal seams,average sheet drilling speed is up to 24.4 m/h.Discharge of all these hole is up to 2.0~2.5 m3/min.

     

/

返回文章
返回